Standard plywood with veneer core and veneer face. For interior and exterior uses.

Veneer Faced Plywood

Our Plywood has many years of experience producing a variety of veneer faced plywood manufactured in Thailand.

It is very important to us that that all our products are produced to a high standard and made with integrity. Our team of inspectors that make sure all panels produced meet or exceed customers’ expectation.

Plywood sizes are 1220x2440mm, 1250x2500mm, 915x2135mm, 720/820/920x2150mm, or cut sizes.

Hardwood faced plywood and fancy plywood are intended for use in non-structural applications where a high-quality aesthetic finish is required such as manufacture of cabinets, furniture, store displays and architectural decorations, interior wall panelling and fitments but must not be used in exposed, wet or damp conditions.


Commercial Grade

  • Core

    Poplar Veneer

  • Face

    Okoume, Bintangor, Pine, EV

  • Glue

    Urea-Formaldehyde (UF)

  • Features

    Manufactured from sustainably-grown Thailand plantation poplar. Available in B, C, and D grade surface veneer grades. Sheet Thickness from 2mm to 25mm.

Furniture Grade

  • Core

    Selected Poplar/Eucalyptus

  • Face

    Bleached Poplar, Okoume, Pine, Birch, Oak, Walnut, EV, Burma Teak, Red Oak, Ash

  • Glue

    Urea-Formaldehyde (CARB P2 Grade available)

  • Features

    Core manufactured from top-grade poplar/eucalyptus. Face veneer is available in many veneer species from tropical hardwood to pine and birch. Sheet Thickness from 4mm to 21mm.

WBP Grade

  • Core

    Selected Poplar/Eucalyptus

  • Face

    Okoume, Bintangor, Pine, Birch

  • Glue

    Melamine UF, Phenolic UF

  • Features

    Manufactured from selected veneers. Waterproof glue is a must. Hot-pressed under super high pressure.

Face Veneer Species

The veneers we use for plywood surfaces are primarily natural sliced and peeled veneers. Wood species range from local poplar wood to tropical hardwood, baltic birch, North American walnut, and Burma teak. The peeled veneers can make a surface for fancy plywood. Not only hardwood veneers, but we also laminate radiata pine and larch pine on the plywood.

Besides the natural veneers, we can also use reconstituted veneer. The recon veneer is a type of rotary cut veneer created from cheaper species, then dyed, layered, laminated, and laid up with grain that replicates a natural species. It offers outstanding consistency in color and grain. If you don’t find the veneer you like on the page, you may contact our sales for more choices and colors.



Pencil Cedar



White Birch

Natural Birch

Bleeched Poplar


Burma Teak

Red Oak

Black Walnut




Core Types

We use poplar veneer to make plywood core for most of our production. Poplar density is around 520 kgs per cubic meter. And it is a perfect material for making decent plywood at a low cost. Besides, we use eucalyptus core, combi core, finger joint core, birch core, etc.

One Time Hot Press Plywood

Plywood substrate not sanded. Final sheets not polished.

  • Poplar core veneers coated with glue
  • Cold Pressing (Pre-pressing)
  • Hardwood faces laminated with hot press machine (only one hot press).
  • Trimming

Two Times Hot Press Plywood

Plywood substrate sanded and repaired. Final sheet polished.

  • Poplar core veneers coated with glue
  • Cold Pressing (Pre-pressing)
  • Hot Pressing (1st hot press)
  • Substrate Repaired with Putty.
  • Calibrating
  • Hardwood faces laminated with hot press machine (2nd hot press).
  • Polishing
  • Trimming

Hardwood Plywood Uses




Laser Die Making


What is the maximum and minimum thickness of hardwood plywood you can produce?

Min 2.0mm to Max 50mm.

What is the largest size plywood you can do?


Is your hardwood faced plywood calibrated?

We calibrate each plywood to make sure it is flat and strong with attractive appearance. If you don’t need calibrated plywood we can offer you one time hot press plywood.

Where is your hardwood harvested?

Most of them are tropical hardwood from Africa, Malaysia and Russia.

Do you make WBP plywood?

Yes. WBP Plywood is a hardwood faced plywood made with weather and boiling proof glue such as the phenolic adhesive.

Is your WBP plywood 100% waterproof?

It is water resistant but not 100% waterproof. Because the moisture can go into any type of plywood through its glueline and surfaces.

Is POPLAR a hardwood or softwood?

Poplar is actually a hardwood but many people think it as a softwood because its characteristic is more like a softwood. Poplar grain is typical hardwood grain though.